CHC-1000 is a servo based cap sensor designed for high speed cutting up to 60m/min.
It is mainly used on fiber laser, CO2 laser metal sheet cutting height control.
CHC-1000 offers interface/communication openly to any CNC controller on market, or we can customize according to your CNC controller's communication design.
Support all kinds of fiber laser like IPG, Rofin, SPI, Trumpf, Raycus from 500W to 6000W.
CHC-1000L is a closed-loop controller for laser cutting height control( called Auto height control system in laser cutting field). By providing a unique Ethernet communication(TCP/IP protocol) interface, it can support many funnctions with CNC controller for laser cutting, such as automatic tracking of cutting height, segmented piercing, progressive piercing, edge seek, leapfrog, arbitrary setting of lift-up height of cutting head.
Thanks to our years experience of different kinds of torch height controller design, Currently CHC-1000L should have better response rate than other similar products.
Sampling rate: 1000 times per second.
Static measurement accuracy: 0.001mm.
Dynamic response accuracy:0.05mm.
Following range: 0-25mm.
The signal will not decay with strong capacitity of resisting when the length of signal transmission cable is up to 100m.
Support network communications and U disk online update.
Adapt to any cutting head and nozzle.
Support alarm while hitting the board and beyong the edge.
Support edge detection and automatica inspection.
Automatic calibration process, with fast and easy operations.
Support leapfrog and segmented piercing.
Support oscilloscope functions to detect the capacitance in real time.
Please download manual at follow page,